Sunday, August 9, 2009

SS7 Details

Message Transfer Part (MTP)

The Message Transfer Part (MTP) layer of the SS7 protocol provides the routing and network interface capabilities that support SCCP, TCAP, and ISUP. Message Transfer part (MTP) is divided into three levels.

MTP Level 1 (Physical layer) defines the physical, electrical, and functional characteristics of the digital signaling link. Physical interfaces defined include E-1(2048 kb/s; 32 64 kb/s channels), DS-1 (1544 kb/s; 24 64 kp/s channels), V.35 (64 kb/s),DS-0 (64 kb/s), and DS-0A (56 kb/s).

MTP Level 2 provides the reliability aspects of MTP including error monitoring and recovery. (MTP-2) is a signalling link which together with MTP-3 provides reliable transfer of signalling messages between two directly connected signalling points.

MTP Level 3 provides the link, route, and traffic management aspects of MTP. MTP 3, thus ensures reliable transfer of the signalling messages, even in the case of the failure of the signalling links and signalling transfer points. The protocol therefore includes the appropriate functions and procedures necessary both to inform the remote parts of the signalling network of the consequences of a fault, and appropriately reconfigure the routing of messages through the signalling network.

Signaling Connection Control Part (SCCP)

The Signaling Connection Control Part (SCCP) layer of the SS7 stack provides provides connectionless and connection-oriented network services and global title translation (GTT) capabilities above MTP Level 3. SCCP is used as the transport layer for TCAP-based services. It offers both Class 0 (Basic) and Class 1 (Sequenced) connectionless services. SCCP also provides Class 2 (connection oriented) services, which are typically used by Base Station System Application Part, Location Services Extension (BSSAP-LE). In addition, SCCP provides Global Title Translation (GTT) functionality.

The signaling connection control part (SCCP) provides two major functions that are lacking in the MTP. The first of these is the capability to address applications within a signaling point. The MTP can only receive and deliver messages from a node as a whole; it does not deal with software applications within a node.

While MTP network-management messages and basic call-setup messages are addressed to a node as a whole, other messages are used by separate applications (referred to as subsystems) within a node. Examples of subsystems are 800 call processing, calling-card processing, advanced intelligent network (AIN), and custom local-area signaling services (CLASS) services (e.g., repeat dialing and call return). The SCCP allows these subsystems to be addressed explicitly.

The signaling connection control part (SCCP) provides two major functions that are lacking in the MTP. The first of these is thecapability to address applications within a signaling point. The MTP can only receive and deliver messages from a node as a whole; it does not deal with software applications within a node.

The second function provided by the SCCP is Global Title translation, the ability to perform incremental routing using a capability called global title translation (GTT). GTT frees originating signaling points from the burden of having to know every potential destination to which they might have to route a message. A switch can originate a query, for example, and address it to an STP along with a request for GTT. The receiving STP can then examine a portion of the message, make a determination as to where the message should be routed, and then route it.

For example, calling-card queries (used to verify that a call can be properly billed to a calling card) must be routed to an SCP designated by the company that issued the calling card. Rather than maintaining a nationwide database of where such queries should be routed (based on the calling-card number), switches generate queries addressed to their local STPs, which, using GTT, select the correct destination to which the message should be routed. Note that there is no magic here; STPs must maintain a database that enables them to determine where a query should be routed. GTT effectively centralizes the problem and places it in a node (the STP) that has been designed to perform this function.

In performing GTT, an STP does not need to know the exact final destination of a message. It can, instead, perform intermediate GTT, in which it uses its tables to find another STP further along the route to the destination. That STP, in turn, can perform final GTT, routing the message to its actual destination.

Intermediate GTT minimizes the need for STPs to maintain extensive information about nodes that are far removed from them. GTT also is used at the STP to share load among mated SCPs in both normal and failure scenarios. In these instances, when messages arrive at an STP for final GTT and routing to a database, the STP can select from among available redundant SCPs. It can select an SCP on either a priority basis (referred to as primary backup) or so as to equalize the load across all available SCPs (referred to as load sharing).

Transaction Capabilities Application Part (TCAP)

Transaction Capabilities Application Part (TCAP) defines the messages and protocol used to communicate between applications (deployed as subsystems) in nodes. It is used for database services such as calling card, 800, and AIN as well as switch-to-switch services including repeat dialing and call return. Because TCAP messages must be delivered to individual applications within the nodes they address, they use the SCCP for transport.

TCAP enables the deployment of advanced intelligent network services by supporting non-circuit related information exchange between signalling points using the SCCP connectionless service. TCAP messages are contained within the SCCP portion of an MSU. A TCAP message is comprised of a transaction portion and a component portion.

TCAP supports the exchange of non-circuit related data between applications across the SS7 network using the SCCP connectionless service. Queries and responses sent between SSPs and SCPs are carried in TCAP messages. For example, an SSP sends a TCAP query to determine the routing number associated with a dialed 800/888 number and to to check the personal identification number (PIN) of a calling card user. In mobile networks (IS-41 and GSM), TCAP carries Mobile Application Part (MAP) messages sent between mobile switches and databases to support user authentication, equipment identification, and roaming.

ISDN User Part (ISUP)

ISUP (ISDN User Part) defines the messages and protocol used in the establishment and tear down of voice and data calls over the public switched telephone network (PSTN), and to manage the trunk network on which they rely. Despite its name, ISUP is used for both ISDN and non–ISDN calls. In the North American version of SS7, ISUP messages rely exclusively on MTP to transport messages between concerned nodes.

ISUP controls the circuits used to carry either voice or data traffic. In addition, the state of circuits can be verified and managed using ISUP. The management of the circuit infrastructure can occur both at the individual circuit level and for groups of circuits.

Services that can be defined using ISUP include: Switching, Voice mail, Internet offload. ISUP is ideal for applications such as switching and voice mail in which calls are routed between endpoints.

When used in conjunction with TCAP and SIGTRAN, ISUP becomes an enabler for Internet offload solutions in which Internet sessions of relatively long duration can be isolated from relatively brief phone conversations.

A simple call flow using ISUP signaling is as follows:

Call set up: When a call is placed to an out-of-switch number, the originating SSP transmits an ISUP initial address message (IAM) to reserve an idle trunk circuit from the originating switch to the destination switch. The destination switch rings the called party line if the line is available and transmits an ISUP address complete message (ACM) to the originating switch to indicate that the remote end of the trunk circuit has been reserved. The STP routes the ACM to the originating switch which rings the calling party's line and connects it to the trunk to complete the voice circuit from the calling party to the called party.

Call connection: When the called party picks up the phone, the destination switch terminates the ringing tone and transmits an ISUP answer message (ANM) to the originating switch via its home STP. The STP routes the ANM to the originating switch which verifies that the calling party's line is connected to the reserved trunk and, if so, initiates billing.

Call tear down: If the calling party hangs-up first, the originating switch sends an ISUP release message (REL) to release the trunk circuit between the switches. The STP routes the REL to the destination switch. If the called party hangs up first, or if the line is busy, the destination switch sends an REL to the originating switch indicating the release cause (e.g., normal release or busy). Upon receiving the REL, the destination switch disconnects the trunk from the called party's line, sets the trunk state to idle, and transmits an ISUP release complete message (RLC) to the originating switch to acknowledge the release of the remote end of the trunk circuit. When the originating switch receives (or generates) the RLC, it terminates the billing cycle and sets the trunk state to idle in preparation for the next call.

Mobile Application Part (MAP)

Mobile Application Part (MAP) messages sent between mobile switches and databases to support user authentication, equipment identification, and roaming are carried by TCAP. In mobile networks (IS-41 and GSM) when a mobile subscriber roams into a new mobile switching center (MSC) area, the integrated visitor location register requests service profile information from the subscriber's home location register (HLR) using MAP (mobile application part) information carried within TCAP messages.

The Mobile Application Part (MAP), one of protocols in the SS7 suite, allows for the implementation of mobile network (GSM) signaling infrastructure. The premise behind MAP is to connect the distributed switching elements, called mobile switching centers (MSCs) with a master database called the Home Location Register (HLR). The HLR dynamically stores the current location and profile of a mobile network subscriber. The HLR is consulted during the processing of an incoming call. Conversely, the HLR is updated as the subscriber moves about the network and is thus serviced by different switches within the network.

MAP has been evolving as wireless networks grow, from supporting strictly voice, to supporting packet data services as well. The fact that MAP is used to connect NexGen elements such as the Gateway GPRS Support node (GGSN) and Serving Gateway Support Node (SGSN) is a testament to the sound design of the GSM signaling system.

MAP has several basic functions:

* Mechanism for a Gateway-MSC (GMSC) to obtain a routing number for an incoming call

* Mechanism for an MSC via integrated Visitor Location Register (VLR) to update subscriber status and routing number.

* Subscriber CAMEL trigger data to switching elements via the VLR

* Subscriber supplementary service profile and data to switching elements via the VLR.

Intelligent Network Application Part (INAP)

Intelligent Network Application Part (INAP) is the signaling protocol used in Intelligent Networking. Developed by the International Telecommunications Union (ITU), IN is recognized as a global standard. Within the International Telecommunications Union, a total functionality of the IN has been defined and implemented in digestible segments called capability sets. The first version to be released was Capability Set 1 (CS-1). Currently CS-2 is defined and available. The CAMEL Application Part (CAP) is a derivative of INAP and enables the use of INAP in mobile GSM networks.

INAP is a signaling protocol between a service switching point (SSP), network media resources (intelligent peripherals), and a centralized network database called a service control point (SCP). The SCP consists of operator or 3rd party derived service logic programs and data.

Service Switching Point (SSP) is a physical entity in the Intelligent Network that provides the switching functionality. SSP the point of subscription for the service user, and is responsible for detecting special conditions during call processing that cause a query for instructions to be issued to the SCP.
The SSP contains Detection Capability to detect requests for IN services. It also contains capabilities to communicate with other physical entities containing SCF, such as SCP, and to respond to instructions from the other physical entities. Functionally, an SSP contains a Call Control Function, a Service Switching Function, and, if the SSP is a local exchange, a Call Control Agent Function. It also may optionally contain Service Control Function, and/or a Specialized Resource Function, and/or a Service Data Function. The SSP may provide IN services to users connected to subtending Network Access Points.
The SSP is usually provided by the traditional switch manufacturers. These switches are programmable and they can be implemented using multipurpose processors. The main difference of SSP from an ordinary switch is in the software where the service control of IN is separated from the basic call control.
Service Control Point (SCP) validates and authenticates information from the service user, processing requests from the SSP and issuing responses.The SCP stores the service provider instructions and data that direct switch processing and provide call control. At predefined points during processing an incoming or outgoing call, the switch suspends what it is doing, packages up information it has regarding the processing of the call, and queries the SCP for further instruction. The SCP executes user-defined programs that analyze the current state of the call and the information received from the switch. The programs can then modify or create the call data that is sent back to the switch. The switch then analyzes the information received from the SCP and follows the provided instruction to further process the call.
Functionally, an SCP contains Service Control Function (SCF) and optionally also Service Data Function (SDF). The SCF is implemented in Service Logic Programs (SLP). The SCP is connected to SSPs by a signalling network. Multiple SCPs may contain the same SLPs and data to improve service reliability and to facilitate load sharing between SCPs. In case of external Service Data Point (SDP) the SCF can access data through a signalling network. The SDP may be in the same network as the SCP, or in another network. The SCP can be connected to SSPs, and optionally to IPs, through the signalling network. The SCP can also be connected to an IP via an SSP relay function. The SCP comprises the SCP node, the SCP platform, and applications. The node performs functions common to applications, or independent of any application; it provides all functions for handling service-related, administrative, and network messages. These functions include message discrimination, distribution, routing, and network management and testing. For example, when the SCP node receives a service-related message, it distributes the incoming message to the proper application. In turn, the application issues a response message to the node, which routes it to the appropriate network elements. The SCP node gathers data on all incoming and outgoing messages to assist in network administration and cost allocation. This data is collected at the node, and transmitted to an administrative system for processing.
Intelligent Peripheral (IP) provides resources such as customized and concatenated voice announcements, voice recognition, and Dual Tone Multi-Frequencies (DTMF) digit collection, and contains switching matrix to connect users to these resources. The IP supports flexible information interactions between a user and the network. Functionally, the IP contains the Special Resource Function. The IP may directly connect to one or more SSPs, and/or may connect to the signalling network.

Service Management Point (SMP) performs service management control, service provision control, and service deployment control. Examples of functions it can perform are database administration, network surveillance and testing, network traffic management, and network data collection. Functionally, the SMP contains the Service Management Function and, optionally, the Service Management Access Function and the Service Creation Environment
Function. The SMP can access all other Physical Entities.

Conceptual model of the Intelligent Network :

The IN standards present a conceptual model of the Intelligent Network that model and abstract the IN functionality in four planes:

The Service Plane (SP): This plane is of primary interest to service users and providers. It describes services and service features from a user perspective, and is not concerned with how the services are implemented within the network.
The Global Functional Plane (GFP): The GFP is of primary interest to the service designer. It describes units of functionality, known as service independent building blocks (SIBs) and it is not concerned with how the functionality is distributed in the network. Services and service features can be realised in the service plane by combining SIBs in the GFP.
The Distributed Functional Plane (DFP): This plane is of primary interest to network providers and designers. It defines the functional architecture of an IN-structured network in terms of network functionality, known as functional entities (FEs). SIBs in the GFP are realised in the DFP by a sequence of functional entity actions (FEAs) and their resulting information flows.
The Physical Plane (PP): Real view of the physical network.The PP is of primary interest to equipment providers. It describes the physical architecture for an IN-structured network in terms of physical entities (PEs) and the interfaces between them. The functional entities from the DFP are realised by physical entities in the physical plane.

Services that can be defined with INAP include:

Single number service: one number reaches a local number associated with the service
Personal access service: provide end user management of incoming calls
Disaster recovery service: define backup call destinations in case of disaster
Do not disturb service: call forward
Virtual private network short digit extension dialing service

Advantages created by the IN architecture:

extensive use of information processing techniques;
efficient use of network resources;
modularization of network functions;
integrated service creation and implementation by means of reusable standard network functions;
flexible allocation of network functions to physical entities;
portability of network functions among physical entities;
standardised communication between network functions via service independent interfaces;
customer control over their specific service attributes;
standardised management of service logic.

Signalling System #7 (SS7)

There are two essential components to all telephone calls. The first, and most obvious, is the actual content—our voices, faxes, modem data, etc. The second is the information that instructs telephone exchanges to establish connections and route the “content” to an appropriate destination. Telephony signaling is concerned with the creation of standards for the latter to achieve the former. These standards are known as protocols. SS7 or Signaling System Number 7 is simply another set of protocols that describe a means of communication between telephone switches in public telephone networks. They have been created and controlled by various bodies around the world, which leads to some specific local variations, but the principal organization with responsibility for their administration is the International Telecommunications Union or ITU-T.

Signalling System Number 7 (SS#7 or C7) is the protocol used by the telephone companies for interoffice signalling. In the past, in-band signalling techniques were used on interoffice trunks. This method of signalling used the same physical path for both the call-control signalling and the actual connected call. This method of signalling is inefficient and is rapidly being replaced by out-of-band or common-channel signalling techniques.

To understand SS7 we must first understand something of the basic inefficiency of previous signaling methods utilized in the Public Switched Telephone Network (PSTN). Until relatively recently, all telephone connections were managed by a variety of techniques centered on “in band” signaling.

A network utilizing common-channel signalling is actually two networks in one:

1. First there is the circuit-switched "user" network which actually carries the user voice and data traffic. It provides a physical path between the source and destination.
2. The second is the signalling network which carries the call control traffic. It is a packet-switched network using a common channel switching protocol.

The original common channel interoffice signalling protocols were based on Signalling System Number 6 (SS#6). Today SS#7 is being used in new installations worldwide. SS#7 is the defined interoffice signalling protocol for ISDN. It is also in common use today outside of the ISDN environment.

The primary function of SS#7 is to provide call control, remote network management, and maintenance capabilities for the inter- office telephone network. SS#7 performs these functions by exchanging control messages between SS#7 telephone exchanges (signalling points or SPs) and SS#7 signalling transfer points (STPs).

The switching offices (SPs) handle the SS#7 control network as well as the user circuit-switched network. Basically, the SS#7 control network tells the switching office which paths to establish over the circuit-switched network. The STPs route SS#7 control packets across the signalling network. A switching office may or may not be an STP.

SS7 Protocol layers:

The SS7 network is an interconnected set of network elements that is used to exchange messages in support of telecommunications functions. The SS7 protocol is designed to both facilitate these functions and to maintain the network over which they are provided. Like most modern protocols, the SS7 protocol is layered.

Physical Layer (MTP-1)

This defines the physical and electrical characteristics of the signaling links of the SS7 network. Signaling links utilize DS–0 channels and carry raw signaling data at a rate of 56 kbps or 64 kbps (56 kbps is the more common implementation).

Message Transfer Part—Level 2 (MTP-2)

The level 2 portion of the message transfer part (MTP Level 2) provides link-layer functionality. It ensures that the two end points of a signaling link can reliably exchange signaling messages. It incorporates such capabilities as error checking, flow control, and sequence checking.

Message Transfer Part—Level 3 (MTP-3)

The level 3 portion of the message transfer part (MTP Level 3) extends the functionality provided by MTP level 2 to provide network layer functionality. It ensures that messages can be delivered between signaling points across the SS7 network regardless of whether they are directly connected. It includes such capabilities as node addressing, routing, alternate routing, and congestion control.

Signaling Connection Control Part (SCCP)

ISDN User Part (ISUP)

ISUP user part defines the messages and protocol used in the establishment and tear down of voice and data calls over the public switched network (PSN), and to manage the trunk network on which they rely. Despite its name, ISUP is used for both ISDN and non–ISDN calls. In the North American version of SS7, ISUP messages rely exclusively on MTP to transport messages between concerned nodes.

Transaction Capabilities Application Part (TCAP)

TCAP defines the messages and protocol used to communicate between applications (deployed as subsystems) in nodes. It is used for database services such as calling card, 800, and AIN as well as switch-to-switch services including repeat dialing and call return. Because TCAP messages must be delivered to individual applications within the nodes they address, they use the SCCP for transport.

Operations, Maintenance, and Administration Part (OMAP)

OMAP defines messages and protocol designed to assist administrators of the SS7 network. To date, the most fully developed and deployed of these capabilities are procedures for validating network routing tables and for diagnosing link troubles. OMAP includes messages that use both the MTP and SCCP for routing.

GSM Specifications

GSM Specifications:

Before looking at the GSM specifications, it is important to understand the following basic terms:

bandwidth —the range of a channel's limits; the broader the bandwidth, the faster data can be sent
bits per second (bps) —a single on-off pulse of data; eight bits are equivalent to one byte
frequency —the number of cycles per unit of time; frequency is measured in hertz (Hz)
kilo (k) —kilo is the designation for 1,000; the abbreviation kbps represents 1,000 bits per second
megahertz (MHz) —1,000,000 hertz (cycles per second)
milliseconds (ms) —one-thousandth of a second
watt (W) —a measure of power of a transmitter

Specifications for different personal communication services (PCS) systems vary among the different PCS networks. Listed below is a description of the specifications and characteristics for GSM.

frequency band —The frequency range specified for GSM is 1,850 to 1,990 MHz (mobile station to base station).
duplex distance —The duplex distance is 80 MHz. Duplex distance is the distance between the uplink and downlink frequencies. A channel has two frequencies, 80 MHz apart.
channel separation —The separation between adjacent carrier frequencies. In GSM, this is 200 kHz.
modulation —Modulation is the process of sending a signal by changing the characteristics of a carrier frequency. This is done in GSM via Gaussian minimum shift keying (GMSK).
transmission rate —GSM is a digital system with an over-the-air bit rate of 270 kbps.
access method —GSM utilizes the time division multiple access (TDMA) concept. TDMA is a technique in which several different calls may share the same carrier. Each call is assigned a particular time slot.
speech coder —GSM uses linear predictive coding (LPC). The purpose of LPC is to reduce the bit rate. The LPC provides parameters for a filter that mimics the vocal tract. The signal passes through this filter, leaving behind a residual signal. Speech is encoded at 13 kbps.

GSM Subscriber Services

There are two basic types of services offered through GSM: telephony (also referred to as teleservices) and data (also referred to as bearer services). Telephony services are mainly voice services that provide subscribers with the complete capability (including necessary terminal equipment) to communicate with other subscribers. Data services provide the capacity necessary to transmit appropriate data signals between two access points creating an interface to the network. In addition to normal telephony and emergency calling, the following subscriber services are supported by GSM:

dual-tone multifrequency (DTMF) —DTMF is a tone signaling scheme often used for various control purposes via the telephone network, such as remote control of an answering machine. GSM supports full-originating DTMF.
facsimile group III —GSM supports CCITT Group 3 facsimile. As standard fax machines are designed to be connected to a telephone using analog signals, a special fax converter connected to the exchange is used in the GSM system. This enables a GSM–connected fax to communicate with any analog fax in the network.
short message services —A convenient facility of the GSM network is the short message service. A message consisting of a maximum of 160 alphanumeric characters can be sent to or from a mobile station. This service can be viewed as an advanced form of alphanumeric paging with a number of advantages. If the subscriber's mobile unit is powered off or has left the coverage area, the message is stored and offered back to the subscriber when the mobile is powered on or has reentered the coverage area of the network. This function ensures that the message will be received.
cell broadcast —A variation of the short message service is the cell broadcast facility. A message of a maximum of 93 characters can be broadcast to all mobile subscribers in a certain geographic area. Typical applications include traffic congestion warnings and reports on accidents.
voice mail —This service is actually an answering machine within the network, which is controlled by the subscriber. Calls can be forwarded to the subscriber's voice-mail box and the subscriber checks for messages via a personal security code.
fax mail —With this service, the subscriber can receive fax messages at any fax machine. The messages are stored in a service center from which they can be retrieved by the subscriber via a personal security code to the desired fax number.

Supplementary Services

GSM supports a comprehensive set of supplementary services that can complement and support both telephony and data services. Supplementary services are defined by GSM and are characterized as revenue-generating features. A partial listing of supplementary services follows.

call forwarding —This service gives the subscriber the ability to forward incoming calls to another number if the called mobile unit is not reachable, if it is busy, if there is no reply, or if call forwarding is allowed unconditionally.
barring of outgoing calls —This service makes it possible for a mobile subscriber to prevent all outgoing calls.
barring of incoming calls —This function allows the subscriber to prevent incoming calls. The following two conditions for incoming call barring exist: baring of all incoming calls and barring of incoming calls when roaming outside the home PLMN.
advice of charge (AoC) —The AoC service provides the mobile subscriber with an estimate of the call charges. There are two types of AoC information: one that provides the subscriber with an estimate of the bill and one that can be used for immediate charging purposes. AoC for data calls is provided on the basis of time measurements.
call hold —This service enables the subscriber to interrupt an ongoing call and then subsequently reestablish the call. The call hold service is only applicable to normal telephony.
call waiting —This service enables the mobile subscriber to be notified of an incoming call during a conversation. The subscriber can answer, reject, or ignore the incoming call. Call waiting is applicable to all GSM telecommunications services using a circuit-switched connection.
multiparty service —The multiparty service enables a mobile subscriber to establish a multiparty conversation—that is, a simultaneous conversation between three and six subscribers. This service is only applicable to normal telephony.
calling line identification presentation/restriction —These services supply the called party with the integrated services digital network (ISDN) number of the calling party. The restriction service enables the calling party to restrict the presentation. The restriction overrides the presentation.
closed user groups (CUGs) —CUGs are generally comparable to a PBX. They are a group of subscribers who are capable of only calling themselves and certain numbers.

GSM Overview

Global system for mobile communication (GSM) is a globally accepted standard for digital cellular communication. GSM is the name of a standardization group established in 1982 to create a common European mobile telephone standard that would formulate specifications for a pan-European mobile cellular radio system operating at 900 MHz. It is estimated that many countries outside of Europe will join the GSM partnership.

Cellular is one of the fastest growing and most demanding telecommunications applications. Throughout the evolution of cellular telecommunications, various systems have been developed without the benefit of standardized specifications. This presented many problems directly related to compatibility, especially with the development of digital radio technology. The GSM standard is intended to address these problems.

From 1982 to 1985 discussions were held to decide between building an analog or digital system. After multiple field tests, a digital system was adopted for GSM. The next task was to decide between a narrow or broadband solution. In May 1987, the narrowband time division multiple access (TDMA) solution was chosen.

GSM provides recommendations, not requirements. The GSM specifications define the functions and interface requirements in detail but do not address the hardware. The reason for this is to limit the designers as little as possible but still to make it possible for the operators to buy equipment from different suppliers. The GSM network is divided into three major systems: the switching system (SS), the base station system (BSS), and the operation and support system (OSS).

GSM Architecture:

The Switching System:

The switching system (SS) is responsible for performing call processing and subscriber-related functions. The switching system includes the following functional units.

home location register (HLR) —The HLR is a database used for storage and management of subscriptions. The HLR is considered the most important database, as it stores permanent data about subscribers, including a subscriber's service profile, location information, and activity status. When an individual buys a subscription from one of the PCS operators, he or she is registered in the HLR of that operator.
mobile services switching center (MSC) —The MSC performs the telephony switching functions of the system. It controls calls to and from other telephone and data systems. It also performs such functions as toll ticketing, network interfacing, common channel signaling, and others.
visitor location register (VLR) —The VLR is a database that contains temporary information about subscribers that is needed by the MSC in order to service visiting subscribers. The VLR is always integrated with the MSC. When a mobile station roams into a new MSC area, the VLR connected to that MSC will request data about the mobile station from the HLR. Later, if the mobile station makes a call, the VLR will have the information needed for call setup without having to interrogate the HLR each time.
authentication center (AUC) —A unit called the AUC provides authentication and encryption parameters that verify the user's identity and ensure the confidentiality of each call. The AUC protects network operators from different types of fraud found in today's cellular world.
equipment identity register (EIR) —The EIR is a database that contains information about the identity of mobile equipment that prevents calls from stolen, unauthorized, or defective mobile stations. The AUC and EIR are implemented as stand-alone nodes or as a combined AUC/EIR node.

The Base Station System (BSS):

All radio-related functions are performed in the BSS, which consists of base station controllers (BSCs) and the base transceiver stations (BTSs).

BSC —The BSC provides all the control functions and physical links between the MSC and BTS. It is a high-capacity switch that provides functions such as handover, cell configuration data, and control of radio frequency (RF) power levels in base transceiver stations. A number of BSCs are served by an MSC.
BTS —The BTS handles the radio interface to the mobile station. The BTS is the radio equipment (transceivers and antennas) needed to service each cell in the network. A group of BTSs are controlled by a BSC.

The Operation and Support System:

The operations and maintenance center (OMC) is connected to all equipment in the switching system and to the BSC. The implementation of OMC is called the operation and support system (OSS). The OSS is the functional entity from which the network operator monitors and controls the system. The purpose of OSS is to offer the customer cost-effective support for centralized, regional, and local operational and maintenance activities that are required for a GSM network. An important function of OSS is to provide a network overview and support the maintenance activities of different operation and maintenance organizations.

Additional Functional Elements:

Other functional elements shown in Figure 2 are as follows:

message center (MXE) —The MXE is a node that provides integrated voice, fax, and data messaging. Specifically, the MXE handles short message service, cell broadcast, voice mail, fax mail, e-mail, and notification.
mobile service node (MSN) —The MSN is the node that handles the mobile intelligent network (IN) services.
gateway mobile services switching center (GMSC) —A gateway is a node used to interconnect two networks. The gateway is often implemented in an MSC. The MSC is then referred to as the GMSC.
GSM interworking unit (GIWU) —The GIWU consists of both hardware and software that provides an interface to various networks for data communications. Through the GIWU, users can alternate between speech and data during the same call. The GIWU hardware equipment is physically located at the MSC/VLR.

About Me